Re: [foxboro] 2nd Ethernet Port

Jim,
As far as I know and from what I have seen the QC or "Quick Copy" command
uses rcp "remote copy".  Normally the version distributed by the power group
either uses the /usr/fox/customer/hi/dmcfg to determine workstation names or
the /etc/inet/hosts table.  If using the host table, the alias assigned to
the additional Ethernet port(s) can be used just is the nodebus alias or
letterbug names are used.  Most of the Power scripts use an awk to delimit
or sort the requested alias names.  By modifying the sort request, the
additional network card(s) can be used in place of copying data across the
nodebus.

David Hicks
Invensys Systems, Inc.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Jim Kahlden
Sent: Monday, May 29, 2006 7:41 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] 2nd Ethernet Port

I have read through some of the archives and see that several have posted =
that you can not use rmount on the 2nd Ethernet Port.  I have been using a =
Foxboro supplied script from the Power Application folks called "qc" or =
quick copy that uses the rmount command to copy displays around.  I have =
recently installed a 2nd Ethernet Port and now this utility no longer =
works and I assume it is because this script uses this rmount command.  =
Have any others had this same experience?  What commands do you use to =
copy displays to other stations using the 2nd Ethernet Port if rmount does =
not work?

Thanks,


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: