Re: [foxboro] 200 series baseplates

Ken,
        The "old" baseplates were:
P0914XA Horizontal Baseplate With 8 Module Slots (Superceded by P0926HT)
P0914XB Vertical Baseplate With 8 Module Slots (Superceded by P0926JM)

        You evidently have the new P0926HT which will work fine.  Pay no
attention to the TimeStrobe connections if you won't use them.  The new
baseplates moved the power and fieldbus connections from the top for
Horizontal, (side for vertical), to the front on both horizontal and
vertical.  This added one inch to the height, (width), of the baseplate
from 7.75" to 8.75" but you can mount the baseplates closer together
because the FB and power cables don't get in the way.  They do seem to
be less rigid or made out of lighter gauge plastic/Lexan, but the old
ones were a little deeper and that might be the difference.
Cheers,
Tom VandeWater

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Moore, Kenneth, Celanese/US
Sent: Thursday, December 29, 2005 11:42 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] 200 series baseplates

 About 15 months ago we purchased one of the B04 enclosures with the
Vertical baseplates. Just last month I ordered a horizontal din rail
mounted baseplate for a small enclosure we are retro-fitting. The Horiz.
Base plate I have in hand has two time strobe connections. Did I get the
wrong part? I can't find anything on time strobe in the FoxDocs CD. Oh
and by the way, this baseplate looks and feels very fragile compared to
the ones I got a few months ago. Have they changed this also?


Regards,


Ken Moore

Celanese Emulsions
14355 Hwy. 221
Enoree, SC 29335


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: