Re: [foxboro] 1-5ma input on a FBM201

 
I am not at a system to test it, but does KSCALE/BSCALE, with the right SCI,
offer any possibilities?

Joseph M. Riccardi, Inc.
DCS Services - Industrial Process Control
 
Joe@xxxxxxxxxxxxx
 
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
 

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Bruley, Peter T
Sent: Tuesday, April 29, 2008 4:44 PM
To: Foxboro@Freelists. Org (foxboro@xxxxxxxxxxxxx)
Subject: [foxboro] 1-5ma input on a FBM201

Gentlemen:
        I am trying to use a FBM201 to measure 1-5ma input.

        I am using an AIN & can scale the output to read 0-100% for 1-5ma in
however I don't get the OOS/BAD i/o bits set when I go over/under the OSV

        The AIN block doesn't have a SCI for:  Linear 3200 to 1600 ( 1 to 5
mA)

        Is there any way to set the raw counts scale in the AIN block
manually?


Thank You,

Peter Bruley

Plant Process Computer Analyst
Xcel Energy - Sherco Generating Plant
13999 Industrial Boulevard
Becker, MN, 55308
(763) 261-3821
Peter.T.Bruley@xxxxxxxxxxxxxx



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: