[foxboro] flow meter

Hi guys,

Just wondering if any of you are using flowmeters in your piping and which
type you have good experiences with. We're thinking on installing a
Flowmeter in an oil header. We haven't got flowmeters for the moment, our
products usually are not suited for flowmeters. Except for the oil headers.
We usually work with loadcells but for this project we would need a
flowtransmitter.
Problem seems to be these flowmeters don't transmit 4-20 ma but pulses. Our
DCS can't handle the number of pulses per second, so we'll need a seperate
controller. Are there any flowmeters (2" pipe) that transmit 4-20ma?

Thanks & Rgds

Dirk

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: