[foxboro] dmcmd horn

Hi,
With the horn display manager command I am able to select 16 individual 
frequencies (audible through the GCIO and annun keyboard).
In the horn.cfg I can only select 3 different frequencies.

My question:
Is there a way to 'map' the 3 tones from the horn.cfg to any of the other 
tones, or even better, select an absolute frequency?

We have a control room with  4 operator 'work bay's'.
The 3 available tones are simply not enough.

We could go for the external contact option and connect some external horn but 
with 16 different tones (as available with the dmcmd horn command) we would 
have enough.

If an external horn would be the only option then make/type/supplier for any 
'field proven' horn/buzzer would be highly appreciated.

TIA

Pat Martens
Tot. Raff. Nederland N.V.

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: