If you don't mind, I'd like to ask the community of users about how and why
they use PCs to show FV/DM displays. I know that this is not scientific, but
I'm curious.
So, if you use PCs, would you please answer a few questions for me?
1) How are the PCs used?
a. On a scale of 0 to 10 where
i. 0 is never
uses I/A Series Applications and
ii. 10 is never
uses non-I/A Series applications (except eXceed of course), where would you
rank the use of your PCs?
For example, I think a 10 user is an operator console, a 7 or 8 user might
have company specific programs that need to be run on operator console, a 3
user might be a PC at home used for dial-up support.
2) Why are PCs used?
a. Low-Cost
b. Environmental hardening
c. Remote location hard to reach with a PC
d. Dial-up (or VPN or whatever) access from home
3) What other types of HMI (beside WPs) should we be
offering?
Thanks,
AJ
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave