[foxboro] Unique Alarm Sounds

Our facility will have an integrated control room, 3 separate units
being operated by three separate operators from the same control room
with six screens per operating unit.  My problem is with alarming,
currently only one operator is operating from this control room now but
will be joined by another in a couple of months.  How can I
differentiate alarms based on sound so that each operating area has a
unique sound?  I tinkered with the built-in alarm sounds and these are
unacceptable due to lack of volume or tone.  Does anyone have any ideas
short of outputting the existing horn output to a distortion device and
then to an amp connected to a set of external speakers?
 

Any help would be greatly appreciated. 

 

Dennis Stone

Process Control Engineer

Hunt Refining Company

dstone@xxxxxxxxxxxxxxxx <mailto:dstone@xxxxxxxxxxxxxxxx> 

(205) 391-3345

(205) 391-3564 FAX

 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: