[foxboro] System Monitor Alarms


Hi list, we have four I/A nodes currently every time there is a System
Nomitor Alarm in any node the SYS button activates in all the nodes. Is=

there a way to isolate this behaviour?, I mean, to have reported the Sy=
stem
monitor Alarms ONLY into the node were the alarm was generated?.

Regards

Raymundo M=E9ndez=





***************  PDVSA´S INTERNET E-MAIL USE  ***************
This message may contain information solely  of the interest of PDVSA or
its businesses. Copying,  distribution,  disclosure  or any  use  of the
information   contained  in  this  transmission  is  permitted  only  to
authorized  parties. If you have  received this e-mail by  error, please
destroy it and notify webmaster@xxxxxxxxx or the sender by reply email.

******  USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET  ******
Esta nota puede contener informacion de interes solo  para  PDVSA o  sus
negocios. Solo esta  permitida su  copia, distribucion  o uso a personas
autorizadas. Si recibio esta  nota  por  error,  por  favor destruyala y
notifique al remitente o a webmaster@xxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: