[foxboro] Starting an AIM Historian Instance through VT100

Hello List,
I would like some advice regarding starting an AIM Historian Instance
through a VT100 unix command instead of using the historian manager
graphical user interface.

I use helpful hint HH1001 "Restarting AIMHistorian" from TAC often to
stop and restart my AIM*Historian processes without rebooting  an AW51D
box.  I use a thin-client "go-global" when working remotely.
Unfortunately, I'm unable to perform the last step "open histmanager and
turn the instance on" without opening the histmanager graphical user
interface.  If I open the gui through either the vt100
/opt/aim/bin/histmgr command or the config menu selection, the gui pops
up on the AW in front of the operator instead of the goglobal thin
client screen that I'm using.

Thank you for any help.

AIM Historian 3.2
I/A 6.3
AW51D

Regards,

Michael Bovenkamp
Control Systems Engineering
Engineering Maintenance and Technology
Dofasco Inc.
Phone: (905) 548-7402
Fax: (905) 548-4269


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: