[foxboro] Sparc 5 disk replacement

Hello,
I know this is not a true Fox I/A system questions but it is related.

I have an early vintage ESSCOR simulator for a Foxboro V6.1 system. 
The disk drive recently failed on the instructor's station, a Sparc 5. 
I had some warning about the failure so I have a good set of backup
tapes made with ufsdump.  I also have access to several old Foxboro
Sparc 5's to scrounge parts from.  I would like to know what the
correct procedure is for installing a used drive and restoring my old
system to it using the dump tapes.  I did a quick search in the
archives and on docs.sun.com and did not find much so I hope someone
out there in the ether can give me a hand.  Thanks.

Cyrus Taft
EPRI I&C Center
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: