[foxboro] Similar experience on Fox I/A DCS upgrade

Hi,
We are on the process to upgrading our Fox. I/A 50 series based DCS system
to integrate the MESH network, new P90 AWs and new ZCPs.

The upgrade scope is the one below:

   1. Upgrade of 2 AW51D to 2 P90 on the Mesh network (V6 to V8 running
   on WS 2003)
   2. Upgrade of 1 AW51E to 1 P92 on the Mesh network (V6 to V8 running
   on WS 2003)
   3. Add a Mesh network and associated link to existing Nodebus (ATS)
   4. Nodebus CP Host left on 51F
   5. Upgrade 2 CP40B to ZCP270

This upgrade will bring also to migrating all existing DM MMIs to FoxView,
keeping the AIM Historian on Nodebus and the upgrade of FoxAnalyst to Trend
View.

I want to investigate the reliability of such upgrade and the overall system
integrity when interfacing Nodebus and Mesh. What i may encounter and any
issue i need to consider.

I'd like to share some feedback, experiences, case studies and lesson
learned on similar projects.

Thanks for your time.

Cheers
-- 
Aymen LAZAAR


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: