[foxboro] Server 70 client as Configuration Station

Hello all,

Up to now all the configuration work on our I/A NT-system is done on a
AW70.
For Operator Control, there is one WP70 (with dual screen) available.
When no configuration is in progress (at this moment this is a lot off the
time), the AW70 is also available for the operators.
Due to adding more and more process part to this I/A system, the AW70
becomes less time available for the operators, which is becoming a problem.
We could add a second WP70 to our nodebus, for operator use and claim the
AW70 as a almost full-time Configuration Station.
To save some money, the alternative idea is upgrading the AW70 towards AW70
C, and use a client as Configuration Station.  In this proposition, the
AW70C server remains aivailable for the operators.

Are there any experiences with this kind of solution ?

Regards,
Eric Konings
Degussa Antwerp

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: