[foxboro] STATE block

(I/A Version 8.2, Foxdraw Version 10.0.2)
I am developing a small application that will be using a STATE block. 
There will be a graphic that allows the Operations Engineer to change bits 
in the STATxx (state pattern) parameters.  Unfortunately, when reading 
these parameters back to the graphic, the displayed bits do not update 
unless the graphic is reloaded.

I imagine many of you have not worked with STATE blocks, however, you may 
have seen the identical behavior with the Mxx (memory) parameters of a 
CALCA block.  The displayed information does not update when the value 
changes; when the display is reloaded then the current value is displayed 
properly.  For both the STATE.STATxx and CALCA.Mxx parameters, this 
behavior is observed on both user-generated graphics and the default block 
detail display 

These are parameters that in many applications might not be updating 
frequently (as opposed to say the .PNT of an AIN block), so I can kind of 
see why they behave differently from other parameters.  But I've never 
seen anything in the documentation that labels these somehow as "static" 
parameters not subject to display updates.  Have I missed something in the 
docs? 

More importantly, is there a way to configure my FoxDraw graphic to force 
the display of these parameters to update on change or on say an 
every-5-second basis?


Greg Hurwitt 
E-Mail:  gregory.hurwitt@xxxxxxxx
BASF Corporation
Freeport, TX 77541


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: