[foxboro] SNMP service

This is mostly for the Invensys folks on the list, but if anybody else
knows, please chime in.
 

Recently, I was installing the Invensys "smoke-tested" Microsoft Windows
XP SP2 security patches on a test bed P92, and I noticed that one of the
patches would not run because SNMP was not installed on the box.  Also,
one of our sites is trying to use OSI PI's IT Monitor, and they cannot
interrogate the P92's (which are on both the MESH and a separate
Engineering LAN - they are only using the Engineering LAN for IT
Monitor).  I'm assuming this is also because SNMP is not installed and
running.

 

Is their an official stance by Invensys on loading and running SNMP on
the P90, P91 and P92 machines?  I tried searching the IPS web site for
SNMP and did not find anything that was helpful.

 

Thanks,

 

Tim Lowell

Control Systems Engineer

Tesoro Companies, Inc.

210-626-4929 (w)

210-253-0225 (c)

Timothy.Lowell@xxxxxxxxxxx

 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: