[foxboro] Remote Display Builder/Configurator problem


Hello all,

I'm trying to set up a remote login to an AW51E that can run Display
Builder and Display Configurator.  Everything appears to work; I get a DM
just fine, the Display Builder and Configurator come up from the menu, etc.
The only problem is that display file edits are not being saved (and no
error message is being generated, either).  The login is a non-privileged
user, but the DB and DC are set-uid processes that run as root (at least,
when I can see them...see below), so rights should not be a problem.  Any
ideas?

As a side note, when I invoke DB or DC from the DM menu, I see the process
as dbu or dcu, respectively, and with a PPID that indicates it is a child
of the DM.  If you switch to Configurator from inside Builder, or vice
versa, however, there is no longer a process for it -- at least not one
called dbu or dcu.  No more children exist for the DM, either.  Anyone have
a rational explanation for that?

TIA,

Corey Clingo
Sr. Engineer
BASF Corp.



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: