[foxboro] RE-RE-REbuilding a WP70

I/A NT guru needed.

I have a Dell GX240 WP70, that recently died.  In an attempt to 
resurrect it, we had to do the re-initialize the harddrive.  It then 
boots up as NT4.0 Service Pack 5.  We installed I/A 6.4 Day 0 for NT 
Nodebus and did everything just like the installation manual says (or 
so I think), including loading the correct I/A device drivers.  Long 
and short it will NOT get on the nodebus.  It is connected to a DNBX 
and the DNBX is red-green and stays red-green. Letterbugs are 
OK.  Everything was working before it died.  The IP address is 
correct , based on SYSDEF, but I cannot ping anything on the nodebus, 
nor can anything on the nodebus ping me.  We are stumped.

Any suggestions, including throwing this paperweight out, are appreciated.

Regards,
David

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: