[foxboro] RE : HP895CXI on LEGACY V6.3

Rich,

Tank's for your quick answer.
These parameters was already done

Regards

Th. Brient


-----Message d'origine-----
De=A0: Bakke, Richard A [mailto:rabakke@xxxxxxxxxxxxx]=20
Envoy=E9=A0: jeudi 26 juin 2003 17:51
=C0=A0: foxboro@xxxxxxxxxxxxx
Objet=A0: Re: [foxboro] HP895CXI on LEGACY V6.3

Thierry,
    One possibility is that the printer needs to be specifically =
designated
as a PCL3 printer in the "/etc/printscreen.options" file.  With printer =
LP36
(an HP Deskjet 890C) attached to the parallel port, our AW51B's
/etc/printscreen.options file looks like this:

:LPxx    PCL3
:LP36    PCL3


    I also think you need the "/etc/printscreen.printers" file.  Ours =
looks
like this:

:HP680 PCL3 DRAFT RESOLUTION300 LANDSCAPE STD_COLORS_ONLY
DELTA_RLE_COMPRESSION REAL_SCALE
:HP870  PCL3 NORMAL STD_AND_NOMINAL_COLORS DELTA_RLE_COMPRESSION
:HP870P PCL3 NORMAL PORTRAIT STD_AND_NOMINAL_COLORS =
DELTA_RLE_COMPRESSION


Rich Bakke
Longview Fibre Co.



Thierry BRIENT wrote:

> Hello,
>
> After an realease update V6.1.1 to 6.3 on a WP (AW51B), the =
printscreen
> don't work properly. Only 3 to 5 cm are printed and the printing =
restart
> again and again.
>
> The procedure was the following :
> - V6.2 installation with the day 0 disk (KO 175 SW-B)
> - Site commit installation
> - V6.3 realease update installation (K0 200 TZ-A)
> - Printer installation (K 0173 HX-C)
>
> The result was the following
> - printer ok on lpstast
> - ASCII file printing test ok
> - Printscreen test failed (I am not able to cancel this job)
>
> Thank you for your help
>
> Regards
>
> Th. BRIENT
>
>
> =
_______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys =
Process
> Systems (formerly The Foxboro Company). Use the info you obtain here =
at
> your own risks. Read =
http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             =
http://www.freelists.org/list/foxboro
> to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
>

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: