[foxboro] PactWare and Hart passthru on FBM214/218

Hi all,

Have recently been trying to get hart pass thru messages to work on some
FBM214's and FBM218's without any real success.

The FBM's are attached to an FCP270 and the PactWare is installed on an
XP box on the mesh.
PactWare finds the system configuration and gives me a list of CP's and
FBM's attached to those CP's that support hart.
I have enabled hart in the ECB's and added the field devices to PactWare
and have checked the manual in case I've missed something.

The errors I get from PactWare tell me it cannot read from the device,
but I'm not sure if this really means the filed device or somewhere in
between.

If someone knows the magic trick to get this going or has a working
setup I would really appreciate hearing from you.

Thanks in advance.
Ian Sweetman

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  • » [foxboro] PactWare and Hart passthru on FBM214/218 - Sweetman, Ian F