[foxboro] PIO Bus access error on "A" or "B"
- From: Ajit.S.Kumar@xxxxxxxxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 12 Nov 2008 15:12:00 +0300
Dear Experts,
We are facing few problems with our CP 30 ,40,60s ...It keeps failing with
PIO Bus access error on "A" or "B". After reboot it works fine for couple
of days / months and fails again.
Replacement of CP is still the same. No Improvement. Grounding has been
checked and ferrite installed for CP60. Noticed there is no problem of
repeated failure of CP60 with FCM10E, but DCM10E and FBI10E the failure
are seen escalating.
Secondly , Could anybody let me know why the Compound / Block and OB
Overruns are very high, and I would like to know what's
PIOE1R,PIOEFT,PIOEGB ..Is there a good manual where I could get the
information and Can these counters be reset.
Thanks in advance
Regards
Ajit kumar
Saudi aramco Mob. Refinery.
IDLETM = Idle Time; CUMOVR = Cmpnd/Blk Overruns; OMOVRN = OM Overruns
PIOE1R = FB Retries; PIOEFT = Fault Tolerant Output mismatches
PIOEGB = Good->Bad FBM state changes; PP_NFD = Points NOT Found
CPLBUG IDLETM CPLOAD CUMOVR OMOVRN PIOE1R PIOEFT PIOEGB PP_NFD
A1CP01 47.3 19.60 52655 463152 0 48 609 0
A1CP02 79.4 7.00 0 0 0 0 0 0
A1CP03 84.8 6.80 0 305 0 0 0 0
A1CP04 68.2 11.80 66 16 0 0 0 0
A1CP05 84.3 4.60 1666732 8333 0 0 0 0
A2CP01 40.6 21.00 6262 20247 0 51 114 0
A2CP02 70.4 13.60 1 65580 0 0 0 0
A2CP03 69.3 13.60 0 28613 0 0 0 2
A2CP04 90.0 5.40 0 0 0 0 0 0
A2CP05 88.5 2.60 0 86 0 0 0 0
B1CP01 68.4 19.00 24988 112043 0 268 3253 0
B1CP02 76.8 6.00 0 26 0 0 0 0
B1CP03 70.1 11.20 1 11 0 0 0 0
B1CP04 73.4 21.80 5421794 87795 0 0 0 11
B1CP05 77.5 9.40 1666891 381400 0 0 0 0
B2CP01 81.7 12.40 3878 3294 0 53 236 1
S1CP01 79.4 18.20 2 502 0 5 0 0
S2CP01 64.4 32.00 4 382 0 7 69 0
S7CP01 70.2 25.80 8 623 0 8 19 0
S1CP03 82.9 86.00 650 388 0 698 22145 0
S1CP04 88.6 31.20 866 579 0 2 12274 0
S2CP04 91.8 25.00 0 945 0 0 2185 0
S3CP03 90.6 23.80 17 566 0 93 3299 0
S3CP04 92.4 24.00 2 319 0 24 4940 0
S3CP05 89.1 22.00 70 91 0 3726 5910 1
S4CP01 90.8 38.20 1575 2236 0 3 5296 0
S4CP03 93.0 16.40 4 2158 0 10 1802 0
S5CP02 85.4 50.00 668 302 0 4 2803 0
S5CP04 92.4 10.20 0 237 0 1 84 0
S5CP05 82.3 44.00 439 398 0 29 7315 0
S7CP03 90.0 20.80 0 411 0 0 1082 0
S8CP01 90.4 36.00 835 90 0 1 4262 0
S8CP02 84.0 78.60 776 207 0 1959 59147 0
S8CP03 86.2 62.00 92 145 0 305 7839 4
S8CP04 94.3 22.40 0 61 0 2 240 0
S8CP05 88.4 26.80 3 216 0 7 1100 0
S9CP02 86.1 66.00 2137 331 0 215664 25935 0
S9CP03 90.2 22.40 0 765 0 0 155 0
OMCP12 53.5 50.40 0 0 0 0 18 0
OMCP17 87.6 4.00 0 0 0 0 672 0
S1CP12 64.1 42.60 0 228 0 0 175 0
S2CP12 77.4 22.20 0 174 0 0 0 0
S2CP13 71.1 33.60 0 393 0 0 44 0
S3CP11 69.7 36.20 0 410 0 0 37 0
S3CP12 70.4 32.00 0 244 0 0 50 0
S3CP16 79.7 28.80 0 41 0 0 1346 0
S3CP17 80.6 28.00 0 48 0 0 78 0
S3CP18 80.2 28.00 0 31 0 0 127 0
S4CP12 75.9 28.40 0 1519 0 0 0 0
S5CP11 72.6 26.00 0 296 0 0 93 0
S5CP13 67.0 38.00 0 239 0 0 2 0
S6CP11 76.5 26.80 0 237 0 0 2061 0
S6CP12 71.1 32.00 0 142 0 0 104 0
S6CP13 81.1 19.00 0 221 0 0 4367 0
S6CP14 80.7 20.20 0 265 0 0 97 0
S6CP15 77.5 28.40 0 104 0 0 9335 0
S6CP16 82.9 20.00 0 35 0 0 4509 0
S6CP17 80.6 13.00 0 143 0 0 126 0
S6CP18 74.2 38.00 0 5 0 0 0 0
S7CP12 71.3 32.00 0 364 0 0 3 0
S9CP11 73.2 34.00 0 668 0 0 76 0
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts: