[foxboro] PIDE Alarming

I want to set an alarm for a PIDE output which controls a fan's motor, to be 
enabled only when another fan's motor is stopped. To do so, I've programmed a 
CIN block which reads the secondary motor status and its output is connected to 
the PIDE INHIB parameter. It didn't work, so I changed the IVO parameter of the 
CIN block but the result was the same. Is there any other parameter I should 
take into consideration to do this successfully?
Thanks in advance,


Gonzalo Diaz
Mantenimiento Planta LPG
Servicios Buproneu S.A. (Capex S.A.)
Yacimiento "Agua del Cajón"
TE: ++54 299 493 1200 int 260
Gonzalo.Diaz@xxxxxxxxxxxxxxxxx<mailto:Gonzalo.Diaz@xxxxxxxxxxxxxxxxx>



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: