[foxboro] PIDA Foxboroese ???s

We have been working on some PID and PIDA loops and the manual on these blocks 
are somewhat marginal. They use what we like to call "Foxboroese". Some of the 
Block descriptions are full of "Foxboroese", things that only apply to Foxboro 
systems, commonly opposites of other DCS systems (or they opposite of Foxboro) 
and cannot be Goggled or researched in any other way.

I would like to find some more info out on the interconnections on these blocks 
and how it is all tied together. Is there a manual or book out on these besides 
the Integrated Control Block Description Volumes? The one that comes to mind is 
SPLLAG. Is this tied to the set point as a gain before it gets to the loop or 
does the set point make it in and then it takes effect,  or may be something 
else ????

Thank You for Your Support

Larry Mantei
Process Contol
Fairbanks Gold Mining
PO Box 73726
Fairbanks, Alaska 99707-3726
(907) 488-4653 ext. 2306

larry.mantei@xxxxxxxxxxx<mailto:larry.mantei@xxxxxxxxxxx>



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: