[foxboro] OPC

We are in the process of evaluating some third party programs to
automatically monitor the performance of a control loop and to alert the
appropriate personnel when there is a problem so the loop can be re-tuned.
Is anyone else doing this? What has been your experience with these type of
programs?

The preferred approach of the vendors we considering to getting data out of
the I/A system seems to be through OPC.  Are you using OPC, and if so,
which driver are you using, Foxboro's or third party?  What has been your
experience with it?

Patrick McDermott
Principal Engineer
Hercules Incorporated
Research Center
500 Hercules Road
Wilmington, DE 19808
302-995-3756

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: