[foxboro] MAC Resets

Hi! All

I have three CP40B's FT in one 1 X 8 MS & another one in another 1 X 8 MS,
both in same Rittal Panel.

Issue is too high 802.3 MAC Resets in one of these controllers, and add to
it ft_errors also.


What I have here is now a 30 day data...

            CP3         CP4         CP5         CP6

MAX         4           5           30          16
MIN         0           0           5           0
AVG         0.87        2.50        17.57       7.13


CP3,4 & 5 are in one MS & CP6 in another. Why the CP5 has got a figure that
is too high (Ok CP6 is also not nice but CP5 is nasty). Over time we have
checked for noise also on nodebus, but it's clean.


Why ???


TIA & Best Regards


Ajay Tathgir

Reliance Industries Limited
Mumbai - India


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: