[foxboro] Letterbug Naming Issue
- From: Jeff Hurt <thehurtman@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 10 Apr 2009 11:45:48 -0700 (PDT)
I've got an FCP270 with an FEM100. When adding migration card FBMs in the
IACC, I get errors when using 9 or any letter in the 6th position of the
letterbug. The error is "parameter value doesn't match format". The manual
says that any character can be used for the sixth letterbug position. Our
naming convention for the last 2 characters is rack number then slot position.
There are 12 slots so we are using A, B, C for slots 10, 11, and 12. Any
thoughts?Thanks,Jeff
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Letterbug Naming Issue - Jeff Hurt