[foxboro] Letterbug Configurator on PDA Dell Axim X50v

Hi Everybody.

I've tried to use Letterbug Configurator on a PDA Dell Axim X50v.

The installation of the application: HPS_Config_ARMV4.CAB Ver. 1.2
02-sept-2004
which i've downloaded from Invensys-Website was fine.

But the following error appears on the PDA after trying to assign letterbug
to a FCP270:

GetCommState fail

I know supported devices are HP IPAQ's only.

But maybe somebody out there has found a solution to get it work with Dell
Axim to.

Regards,

Patric

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: