[foxboro] Interfacing IA to Allen Bradley Controlnet

From: "King, Peter" <PKing@xxxxxxxxxxxxxxxxxxx>
To: foxboro@xxxxxxxxxxxxx
Date: Thu, 12 Dec 2002 14:55:32 -0600

What are the options for linking IA directly to the Allen Bradley
Controlnet. The options I am aware of are the use of an AW or installing a
DH+ interface to a PLC attached to Controlnet (this only communicates to the
connected PLC not other devices on Controlnet) . Has anyone had experience
using an AllenBradley KFC module to connect Controlnet directly to an
Integrator 30. 
Thanks
Peter King
Process Systems Superintendent 
Tesoro Petroleum
Golden Eagle Refinery
Tel. (925) 372-3167
Fax (925) 372-3079
E-mail pking@xxxxxxxxxxxxxxxxxxx



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Follow-Ups:

Re: [foxboro] Interfacing IA to Allen Bradley Controlnet
From: Glen Bounds

[foxboro] Interfacing IA to Allen Bradley Controlnet

Other related posts: