[foxboro] Interface between Yokogawa Centum XL and Foxboro I/A

Hi List,

Following is the detail of Interface I have.

Yokowgawa Centum XL is connected to Foxboro I/A using
OPC server.

The OPC server is using centum XL driver for TCP/IP
and getting data from ECGW, updates in shared memory
of OPC server (WindowNT PC). These data are collected
by OPC iogate collector and send to the AIM HISTORIAN
running on AW (Solaris).

Everything work fine. Only problem is I am getting a
system alarm on Yokogawa side saying that OPC server
is not responding and at the same time there is no
data loss. The number of points are 316.

I have checked the configuration on OPC server side
and looks OK. I checked with Yokogawa person about any
time out setting on the system but no luck.

Is anybody on the list have the same interface? If yes
I would like to know the configuration settings on OPC
server side / Yokogawa side.

Thanks for any help

Harshad Viradia

__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: