[foxboro] Intelligent transmitter to Dumb engineer Conversion

Hello all,

We have been asked to assist with a conversion of a lot of Foxboro 
transmitters that currently speak FoxComm and change them to 
4-20ma.  Which means I will have to check all of the AIN blocks to 
make sure that they are ranged correctly when we change the SCI.  In 
the ECB directory there is a .x file for each FoxCom 
transmitter.  What I need to know is, is are there numbers somewhere 
in the .x file that indicate what the high and low ranges will be if 
the transmitter is placed in 4-20ma mode.

Thanks,
David



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: