[foxboro] Installing Foxview/Foxdraw on 8.2 system

Oh Great List,

Hopefully someone has seen this before and has an answer.

We're trying (key work - trying) to load a PW390 workstation (AW) with
8.2/8.3 software, and we are to the point that the 8.2 I/A SW is loaded
(including the trailer CDROMS, and REDL update floppy), and are trying
to load Foxview/Foxdraw 10.1.  We get a message "You cannot install
Foxdraw over I/A.  Aborting Setup".  Okay, we turned I/A off in the
control panel, rebooted without I/A running, and get the same error
message.  I give.

While bouncing between the multiple documents that you are in trying to
install the workstation SW, we may have missed something, but nothing we
can identify.  Any ideas?

Thanks,
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Gaylon Hicks
Tennessee Valley Authority, Browns Ferry Nuclear Plant
Mail Stop SAB-1B
PO Box 2000
Decatur, AL 35609
Phone:(256) 729-7804 Fax:(256) 729-2047
email gfhicks@xxxxxxx
FedEx Address: Shaw Road & Nuclear Plant Road, Athens, AL 35611
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: