[foxboro] ICC station change delay

Dear List,
Intermittently we have been having problems with good old ICC. Here is a
description to see if anyone else has seen this and has some suggestions
where to look
Start the ICC on an AW   good no problem.
Find a compound              good no problem
Select a compound           good no problem
Click on OK                      Not good
Screen goes gray and just sits there for a while (~5 minutes) and then
transfers to new host and opens ICC session. Then all seems to go well
until the next time.

This process is running on a new Solaris on the mesh box (V8.4.2) and
trying to get to a CP via an ATS that sits on Nodebus.  This has happen
on 2 different Solaris boxes (both on the mesh) trying to get to
different CPS (all on nodebus).  Haven't noticed and other issues with
the AW or any Foxview sessions on mesh WP's.

> Nick Steinbrecher
> Process Control Engineer
> (908)-474-3565
> email E.STEINBRECHER@xxxxxxxxxxxx
> 
> 
> This note may contain Infineum confidential information.  If you are
> an unintended recipient; (i) place no reliance on the information
> contained herein; (ii) do not disclose, distribute, or duplicate any
> information from this note; and (iii) please contact the author.
> 
> 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: