[foxboro] IA and Profibus

Hi everyone,

We are using a AW70/uIA/Profibus configuration.
So far so good.
Field devices are E&H,VEGA,FESTO,SIEMENS and TELEMECANIQUE.
We have 2 problems :
-SIEMENS PS2 Positioner does not come on line (PA):
=20  This needs a 4 bytes data + 1 byte Status =3D 5bytes (status=3D 0x80=
)
=20  How do we communicate?
-ALTIVAR 58 VSD (telemecanique) does not come on line (DP):
=20 Should connect immediately.

All other devices are communicating.
=20=20
Has anyone had experience with these or could give advises?
Thanks for any help.

Daniel Dopler
Consultant to:
African Products
email : Daniel.Dopler@xxxxxxxxxxxx=20

=20=20

WARNING: This e-mail is being sent from African Products (Pty) Limited, a=
nd is intended for the addressee named above. Any unauthorised use or int=
erception of this e-mail is illegal. The e-mail message or its attachment=
s may contain confidential or privileged information and may not be copie=
d, forwarded or disclosed to any unauthorised person. If you are not the =
named addressee (or person responsible for forwarding the e-mail to the a=
ddressee) please notify us immediately via return e-mail and destroy the =
copy you have received. Save for bona fide company matters, African Produ=
cts (Pty) Limited accepts no responsibility for the opinions or the conte=
nt in this e-mail or its attachments.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: