[foxboro] I/A 7.0 Configuration

Hi there,

We are planning to configure I/A 7.0 system with mix of Ver 7.0 and 6.4 (XP & 
NT). There will be 3 stations on I/A 7.0 and 1 station on I/A 6.4. It will be 
using non-redundant Control Network configuration. Based on B0193AC document, 
there was no splitter cable used at all. Is that only apply to I/A 7.0 (XP) 
only or it apply to all the stations (XP and NT)?
Earlier, I saw a document stating that if you have I/A 7.0 running, you'll use 
NCNI and you can throw away all the DNBIs and DNBTs. Is this correct?
Based on the documents, there will always be two versions of I/A 7.0 Day0 CD 
(redundant and non-redundant).

Thank you.
Yazid

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: