[foxboro] How to move a FCP online from one Switch to another Switch?

Dear experts,

what's the best way to move a FCP270 online from one switch to another?

Online means that an Operator on a AW should be able to see all Object
Manager / Compound:Block.Parameter values hosted on that FCP.

a scenario could be:

= redundant connection
- single connection


step 1 "current situation"

                                +==>ATS<==>NCNI<==>Switch<==>RCNI<==>AW
on the Nodebus
                                |
AW on the Mesh <==> Root-Switch <==>SW<===>FCP


step 2 "remove the connection from the FCP to one of the two redundant
switches"


                                +==>ATS<==>NCNI<==>Switch<==>RCNI<==>AW
on the Nodebus
                                |
AW on the Mesh <==> Root-Switch <==>SW<--->FCP


step 3 "connect the FCP to another switch"

                                +==>ATS<==>NCNI<==>Switch<==>RCNI<==>AW
on the Nodebus
                                |
AW on the Mesh <==> Root-Switch <==>SW<--->FCP
                          +                 |
                          |-----------------|


step 4 "move the other connection the other switch"


                                +==>ATS<==>NCNI<==>Switch<==>RCNI<==>AW
on the Nodebus
                                |
AW on the Mesh <==> Root-Switch <==>SW
                          +                 
                          |<==============>FCP


step 5 "reset the failed FCP module so that it marries again"

Is it possible and supported to do that?

Regards,
Andreas
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: