[foxboro] HP895CXI on LEGACY V6.3

Hello,

After an realease update V6.1.1 to 6.3 on a WP (AW51B), the printscreen
don't work properly. Only 3 to 5 cm are printed and the printing restart
again and again.

The procedure was the following :
- V6.2 installation with the day 0 disk (KO 175 SW-B)
- Site commit installation
- V6.3 realease update installation (K0 200 TZ-A)
- Printer installation (K 0173 HX-C)

The result was the following
- printer ok on lpstast
- ASCII file printing test ok
- Printscreen test failed (I am not able to cancel this job)

Thank you for your help

Regards

Th. BRIENT
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: