[foxboro] HOW TO CONNECT FBP10 TO FCP270

Dear List,

I am at our customer site for commissioning, previously the problem of AB
PLC through CAM to FBM231 is solved by the help of list members.

This is an upgrade job form IA version 3.3 Unix to 8.2 XP the old system has
CP30FT which is connected to few 100 series FBMs through DFBI and to FBCs
through FBP10 (in daisy chain format of FieldBus) and Field bus is
terminated at TCA of FPB10.

The CP30FT is upgraded to FCP270FT and 100 series FBM and FBC are remain
same.
Now when I connect the Field bus form FCP270FT to existing 100 series FBMs
and to FBP, the SMDH show that all FBMs are ok and communicating I also do
EEPROM Update through SMDH, but the FBP10 and FBPs are red and not
communicating and status shows that Both Field Bus cables are failed.

So, I connect FBP10 directly to FCP270FT but the status is same.

Dear List members please provide me solution of this issue.

Thanks and Best Regards,

Imran Butt,
System Engineer.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: