[foxboro] HART AOUT gives error in sysmon

Hello all,

I have a HART positioner used on an Hand Valve.  Basically the 
operator sets its it and forgets it.  I'd like to forget it too, but 
the darn thing is giving me an alarm in system monitor periodically 
every 20 minutes or so.  The problem is sysmon never shows anything 
wrong (except putting an asterisk on the device and flashing the 
sysmon light).  I check all three sysmon pages when I've acked the 
fault and I check when it's unacked.  The sysmon info pages are 
identical.  If I ack the fault sysmon light quits flashing red and 
goes green and the asterisk disappears.  I can (and probably will) 
inhibit the alarm.  But that kind of defeats all the swell HART info 
that I'm supposed to get.  Anyone seen this before, if so how do I fix it.

Thanks,
David


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: