[foxboro] Foxview screen keypad

Hi,

  I want to create a keypad on a Foxview screen to enter numbers using only
the mouse (no keyboard required).  I can use seti to generate single values
from buttons pretty easily, but I can't figure out how to enter a
multi-digit number using only ten buttons (0 - 9).

  I have a kludge working right now with thirty buttons so the operator can
enter 1 through 30, but I'm hoping someone has created a "soft" keypad on
Foxview and can tell me how to do it.

  Any thoughts?

Steve Murray
Asarco

*

This e-mail and any files transmitted with it are the property of ASARCO LLC 
and/or its affiliates, are confidential, and are intended solely for the use of 
the individual or entity to whom this e-mail is addressed. If you are not a 
named recipient or otherwise have reason to believe that you have received this 
message in error, 
please notify the sender and delete this message immediately from your 
computer. Any other use, retention, dissemination forwarding, printing or 
copying of this e-mail is 
strictly prohibited.  Although this email and any attachments are believed to 
be free of any virus or other defect that might affect any computer system into 
which it is 
received, and opened, it is the responsibility of the recipient to ensure that 
it is virus free and no responsibility is accepted by ASARCO LLC and/or its 
affiliates for any loss or damage arising in any way from its use

This e-mail has been scanned and cleared by MailMarshal 
www.marshalsoftware.com

*
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: