[foxboro] Foxview 99.2.1, AW70, and 1600 x 1200 pixel

How can FoxView (Vers. 99.2.1 on AW70 with I/A Rel. 6.3) be used with a 
resolution of 1600 x 1200 (new TFT displays)?
When I set up that resolution, "maximize" sets the FoxView window's size 
to a quarter of the screen and there is no way to get a larger window. I 
guess the software "thinks" that it deals with four screens with 800 x 600 
each.

When I select a higher resolution (1792 x 1344 in that case) and exit 
FoxView, it restarts with a proper "default" size. Then after returning to 
1600 x 1200, I can adjust the size of the window to fit the whole screen. 
That is OK, but after exiting FoxView, I get the small window again. This 
workaround is of course only working for stations that do not reboot when 
changing resolution.

How can I get a full size window at 1600 * 1200 after a normal reboot or 
restart of FoxView?

Regards
Joachim Leuker

ACTEMIUM HMS Planung & Automation GmbH, Duisburg, Germany
A part of Vinci Energies
http://www.actemium.com
http://www.vinci-energies.com

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: