[foxboro] Foxboro DCS to other DCS communication

I was wondering if anyone is communicating between two different DCS
systems, such as Foxboro I/A Series and Delta V.
 

If so,

1) How are you communicating between the two systems?

2) Are you performing controls across the communication link or just
sending non-control data back and forth?

 

Michael L. Jaudon 
TRONOX, LLC 
(Technology Group-Hamilton, MS) 
(662)343-8710 Office 
(662)304-0313 Cell 
mike.jaudon@xxxxxxxxxx 

If you are not the intended recipient of this e-mail message, any use,
distribution or copying of the message is prohibited.  Please let me
know immediately by return e-mail if you have received this message by
mistake, then delete the e-mail message.  Thank you.

 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: