[foxboro] FoxCAE and AutoCAD

I remember having a discussion a while back about FoxCAE DXF files not being
read by AutoCAD 2000.  At one point there was a suggestion that maybe
AutoCAD 2002 had corrected this problem.  Does anybody have both FoxCAE and
AutoCAD 2002 and can confirm that this is true?  

We have FoxCAE and AutoCAD 2000, and they definitely don't work together,
which is not making our drafting guys happy.  If the solution is to upgrade,
that would at least be better than what they currently do, which is to
reboot, fire up AutoCAD 14, edit our DXF files, then reboot again and go
back to AutoCAD 2000.  The loss of productivity would easily justify an
upgrade, I imagine.

Tim Lowell
Control Systems Engineer
ConocoPhillips, Trainer Refinery
Phone:  610-364-8362
Fax:    610-364-8211
Tim.C.Lowell@xxxxxxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: