[foxboro] FoxApi Install

Dear fellows,

May you help us to install correctly the FoxApi Local Aplication on a AW51B
station,

I installed the foxAPI  diskettes from QF1001369,
at AW51B1 ver 4.3 unix Nodebus.

The file /opt/fox/ais/bin/an_init.cfg was edited to:
        [AISnet]
        ; In this section you should change the YOUR_MACHINE_NAME_HERE to your 
real
        ; machine name. Keep all parameters as they are. The only two parameters
        ; you might need is Printerr and tracelevel. These are used for 
debugging.
        ; Printerr takes 0 or 1 or 2
        ; tracelevel takes 0 or 1
        ; these two parameters will generate a file with .log extension to show
        ; the history of the connection and provide some debugging capability.
        ;
        Printerr=0
        tracelevel=0
        Host=AW51B1
        MaxEnt=500
        NrServer=10
        Protocol=tcpip
        Multiples=yes
        MaxWriteObjects=100
        no_timeout=0
        maxlog=50
        S_STATION=AW51B1
        S_USER=root
        [TCPIP]
        ;
        ;The next line should have the name of the  the FoxAPI server. If you
        ; have several servers, add them on separate lines.
        ;
        ;SERVERNAME = "TCP/IP ADDRESS HERE 55555 /dev/tcp 1024"
        ; The line will read like this
        ;SERVERNAME = "152.155.28.90 55555 /dev/tcp 1024"
        AW51B1 = "151.128.8.66 55555 /dev/tcp 1024"
        ;
        [IAServer Connections]
        ;
        ; The next line should have the name of yor FoxAPI server also.
        ;
        ;SERVERNAME = SERVERNAME TCPIP 1 0 1 1 / 1
        ;
        ; make sure you remove the comment mark ( ; )
        AW51B1 = AW51B1 TCPIP 1 0 1 1 / 1

Then the station was rebooted and after i ran aisstart.
The FoxDraw connected ok with the Server (CSA across FoxAPI) inthe same
station

When i used the an_ping frm /opt/fox/ais/bin/ directory of the AW51B1
station, i obtain the following message:

#an_ping AW51B1

    The machine type is "SUNSPARC"
    The machine name is "AW51B1"
    The user name is "root"
    The Server "AW51B1" is alive
    This machine "AW51B1" is NOT AUTHORIZED!!!

    This user "root" has the following acces to AIS services on host
"AW51B1"
    No Acces
    DOSDM       Not Authorized
    IASERVER    Not Authorized
    FOXDM       Not Authorized
    Fox Api Version 4.2.5 Copyright (c) Foxboro 1992-1999
    Toolkit is SUNSPARC

Is that correct?
If i try to use the function 10 of foxtst tool I obtain a similar message
that I don´t have access to AIS, can
any one help me please?

Best regards,

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: