[foxboro] FW: simulation on aw70/cp60



> We want to establish a setup where we can have blocks turned into
> simulation mode, and then return to FBMs.
> We thought to do that by changing the value in IOMOPT, but this is not a
> settable parameter.
> I was under the impression that VPLINK changed the IOMOPT to 2 , to go
> into simulation mode, and then returned it ot 1, when done. can you advise
> how this is done.
> 
> 
> Best Regards,
> 
> Maurice Moshe
> Systems Manager
> Tel : +972-3-9293459
> Fax: +972-3-9244249
> Cell: +972-55-324044
> EML:mauricem@xxxxxxxxxxx; mauricem@xxxxxxxxxxx
> Mail: AFCON P.O.BOX 3120 Kiryat Arie, Petach Tikva 49130 ISRAEL
> FedEx/UPS: 23 Hayetzira St. Kiryat Arie, Petach Tikva 49512 ISRAEL
> 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: