[foxboro] FW: Supervisory Modes for PIDA's and RATIO blocks

Thanks for the feedback but, apparently there is more to do than what is =
stated below.

Does anyone have an example or a reference of the C-calls that Aspen =
must do to set the .ACK bit?

Thanks,

James W. Hyde III
Controls Technician
Wellman Inc.
Office:         228-533-4528
Cell:       228-332-1371


If the reader of this e-mail is not an intended recipient, you have =
received this e-mail in error and any review, dissemination, =
distribution or copying is strictly prohibited. If you have received =
this e-mail in error, please notify the sender immediately by return =
e-mail and permanently delete the copy you received.


>  -----Original Message-----
> From:         Hyde, James =20
> Sent: Thursday, June 12, 2003 4:29 PM
> To:   'foxboro@xxxxxxxxxxxxx'
> Subject:      Supervisory Modes for PIDA's and RATIO blocks
>=20
> Hi,
>=20
> Does anyone have any experience with Supervisory Modes for PIDA's and =
RATIO blocks?
>=20
> We are thinking about enabling this option for ASPEN Tech to write =
Setpoints but don't understand
> some of the documentation.
>=20
> Should I be able to just set the SUP_OPT=3D1
> and Toggle the .SE parameter, thus enabling ASPEN to write into =
SUP_IN.  ????
>=20
>=20
> Any knowledge in the area would be greatly appreciated.
>=20
>=20
> Thanks,
>=20
> James W. Hyde III
> Controls Technician
> Wellman Inc.
> Office:       228-533-4528
> Cell:       228-332-1371
>=20
>=20
> If the reader of this e-mail is not an intended recipient, you have =
received this e-mail in error and any review, dissemination, =
distribution or copying is strictly prohibited. If you have received =
this e-mail in error, please notify the sender immediately by return =
e-mail and permanently delete the copy you received.
>=20
>=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: