[foxboro] FW: Current Alarm Display

> Our operators would like to be able to access help type screens from the 
> current alarm display.  We need to display some text directly related to an 
> each alarm rather than one large document.  I would like this feature to 
> operate rather like the FoxEDM used to work.  So from the CAD the operator 
> could select an alarm the click another key which would match this C:B 
> against a file and display the appropriate help text.  
> Has any body done anything like this in the past?  If so I would appreciate 
> any advise and experience.
> 
> 
> 
> Dave Williams
> Snr Power and Control Engineer
> Shell UK Oil Products Limited
> Stanlow Manufacturing Complex, PO Box 3, Ellesmere Port, South Wirral CH65 
> 4HB, United Kingdom
> 
> Tel: +44(0)151350 4480 Fax: 4566 Other Tel: +44 (0)7799 657836
> Email: dave.g.williams@xxxxxxxxx
> Internet: http://www.shell.co.uk
> 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: