[foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: "Johnson, Alex P (IPS)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Sun, 12 Feb 2006 12:54:07 -0500
All,
I goofed on my answer. It was a little out of date.
The FCP270 was released to the factory on Friday (10 Feb). That means
that volume shipments can be expected in 4-6 weeks.
So, the answers should be:
Re: Using 100-Series I/O with FCP270
Not yet shipping, but we are taking orders.
The software should be available in volume in a month or so.
Re: Using 100-Series I/O with ZCP270
Not yet. This requires the development of a new FCM. That work is in
progress, but a release date has not been set since it is too early in
the
process.
Regards,
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On
Behalf Of Imran Butt
Sent: Saturday, February 11, 2006 12:01 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Can we connect Legacy 100 series FBM to ZCP270 or
FCP270
Dear All,
I have a query that can we connect the legacy 100 series FBM to ZCP270
or
FCP270 and if we can then HOW.
Best Regards,
Imran Butt
System Engineer
Manstock Engineering Company (Pvt.) Ltd.
39-42 Farid Chambers, Abdullah Haroon Road
Karachi - 74400, Pakistan
TEL: +92-21-5678952, 5678953, 5673145
FAX: +92-21-5682576
Cell: +92-321-2102686
E-mail: imran.butt@xxxxxxxxxxxxxxxxx
URL: http://www.manstock-engg.com
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- Follow-Ups:
- Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Kevin FitzGerrell
- Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Imran Butt
Other related posts:
- » [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Kevin FitzGerrell
- Re: [foxboro] FW: Can we connect Legacy 100 series FBM to ZCP270 or F CP270
- From: Imran Butt