[foxboro] FTMAC addresses

Hi List

The letterbug mapper/server issue has been resolved.  Thanks again for the help.

Today, I have a new problem.

When booting the new Micro I/A controller onto the node a CP30 failed.  
Investigation has shown that there is duplication of FTMAC addresses with the 
micro I/A in question and the CP30 that failed.  Further investigation has 
shown that 2 other stations have duplicate addresses.

Is there a way of manually correcting this FTMAC address problem without 
rebooting or resetting the affected CP's.

Regards



Ashley Davey
Software Engineer
African Products (Pty) Ltd
Gauteng, RSA
Tel : +27 11 458 5342
Fax : +27 11 458 5343

WARNING: This e-mail is being sent from African Products (Pty) Limited, and is 
intended for the addressee named above. Any unauthorised use or interception of 
this e-mail is illegal. The e-mail message or its attachments may contain 
confidential or privileged information and may not be copied, forwarded or 
disclosed to any unauthorised person. If you are not the named addressee (or 
person responsible for forwarding the e-mail to the addressee) please notify us 
immediately via return e-mail and destroy the copy you have received. Save for 
bona fide company matters, African Products (Pty) Limited accepts no 
responsibility for the opinions or the content in this e-mail or its 
attachments.

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: