[foxboro] FBM224 and ProSoft modules

We are embarking on a project that will use an FBM224 talking to a ProSoft
ModBus Protocol module in a PLC5.

I was wondering if anyone on the list had attempted this yet? If so, I would
like to hear what level of performance was achieved. The FBM224 is a ModBus
master, right? So I need a ProSoft ModBus slave then? We plan on moving a
moderately large amount of data this way, and I envision that I will need
more than one set of block transfers in the PLC to accomplish this. Given
this, i am interested in what I can expect for throughput.

TIA.

-- 
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
                                                -- Benjamin Franklin
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: