[foxboro] FBM ROM revision unavailable on CP60/100-series FBMs


I suppose I should call TAC about this, but it doesn't really affect our
process, and I took the chance that someone here already had this problem
and knows a workaround.

We recently upgraded 4 CP30s to CP60s with FBI10Es, retaining our existing
100-series I/O.  After we did the upgrade, we are unable to consistently
see the ROM revision levels on the FBMs using either frev or Sys Mgmt.  One
of the CP60s is fine; all FBMs show ROM revision levels.  Two of the CP60s
show revision levels on some, but not all, of the FBMs.  The fourth CP60
shows no revision levels.

I have rebooted the host AW, to no avail.  System software version is 6.3,
as are the CP images.  The problem doesn't seem to be limited to any
particular FBM type; we have 01s, 04s, 07s, and 09s.

Anyone had this happen to them?

Corey Clingo
Sr. Engineer
BASF Corp.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: