[foxboro] Display Manager Stops Running on WP51F on Ver. 7.1.1

Has anyone experienced the display manager to stop working on a running WP5=
1F box running version 7.1.1 software?  Last week and again today I have ha=
d an experience where the display manager was not running on the box.  This=
 is a dual headed box and is run in the Windows Off mode.  What I have seen=
 is one head completely dark and the other has the Current Alarm page runni=
ng.  Normally I could select the Previous Display button on the CAD and it =
would take me to the FoxView display that was running, but that does not wo=
rk.  I can log in remotely to the box and when doing the ps -eaf command, t=
here are no DM processes running.  There are no messages in the /var/adm/me=
ssage file indicating any type of failure.  To get the box working again I =
just do a shutdown remotely and the restart the box and it works again.  An=
y suggestions where to look first?

Thanks,

Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: