[foxboro] DM Control Range - Display Configurator

Dear list,

I recently noticed that real values inputed from displays aren't being
filtered as supposed to. I set up control ranges (high and low) in the DM
Display Configurator, for all real value inputs, whether going to CALCA,
STATE, REAL, or other blocks.

This is particularly a concern on STATE blocks, where inputting a 0 to any
TIMExx parameter, as it disables the timeout for that step.

I am using V6.5.2. I can't say for certain, however, I didn't notice this
problem on previous versions. Is this a problem with this particular
release, or is there something that I missed?

Thanks for any help,

Maks Wilde


-- 
Confidentiality Warning: This message and any attachments are intended
only for the use of the intended recipient(s), are confidential, and may
be privileged. If you are not the intended recipient, you are hereby
notified that any review, retransmission, conversion to hard copy,
copying, circulation or other use of this message and any attachments is
strictly prohibited. If you are not the intended recipient, please notify
the sender immediately by return e-mail, and delete this message and any
attachments from your system.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: